How to Hide Speaker Wires in Your Home Theater

    A good sound system comes with lots of strings. There are many ways to hide speaker wires, but you have to be careful as some cables can also damage your home. So, our sound engineers did the legwork for you and identified the best ways to hide the speaker wire. You can visit the Soundbar Guru for the latest speakers and soundbar information.

    How to Hide Speaker Wires

    When planning the room’s layout where you have the sound system, speaker wires are considered the least. However, once everything is in place, installing these cables will be a problem. If you have a fully carpeted room lying around your cables, you will be left with many people, which will be a dangerous threat to your family.

    There are so many types it’s hard to say. You can use cable organizers, do molding, even hide them with paint, or go wireless. The choice depends on the floor, wall mi portal fone and decor where you will hide these speaker cables. You can visit how to connect the soundbar to the computer.

    Before you begin, you need to prepare the following tools.

    • Hammer
    • Scissors
    • Staple gun
    • Stud finder

    Remember to plug in all the electronics first to prevent any electrical hazards. Now, our engineers have come up with ways to successfully hide cables in their home theater.

    Using The Objects in Your Space

    Using items in your room is the easiest and cheapest way to hide wires. So, first, look at the available things that you can use to hide the cable wiring.

    Room Decor

    Most room decor is large enough that it can be used to hide wires. You can use your plant decorations to keep your wires simple. You can use adhesive backing to secure these cables to the back of the vessel.

    You can also use furniture such as cabinets and TVs or speaker stands. Regular speaker cables and sound speaker wires can be attached to the back of this furniture.

    However, these methods will not completely hide the wires. There will be parts that are still eyeballs, even the risk of tripping.

    Rugs

    Aside from the above, our experts recommend using a throw carpet to cover these annoying wires. This is an aesthetic way to cover a room without disturbing its design.

    However, since these are small things, they cannot fully cover the wires. Also, be careful when vacuuming so that the cables are not damaged. You can pull the throw carpet carefully to make sure the wires are not attached to them.

    Hide Underneath Carpet

    Sometimes, speaker cables need to go to your floor. The best solution is to run these wires under the carpet. This will give the cables a more comprehensive cover, but some parts will still be visible.

    If you have a fully carpeted room, you can hang the wires under the carpet and baseboard. Using your fingers, move the cables between the rug and the baseboard as far as possible.

    If the trick is difficult, use a thin screwdriver to push the wires between them. Remember to do this carefully to avoid damaging the speaker wire when moving. Do this until the wire is visible.

    Between the strip and the wall, the area under the carpet provides a great place to hide these cables. Hiding the speaker wire in this way makes the whole room look clean and beautiful.

    On Hardwood Floor

    Hardwood floors are still popular when designing homes because it provides a warm atmosphere. However, the appearance of these speaker cables reduces the aesthetic effects of the wood floor.

    This way, it can be challenging to hide the speaker wire on the floor, so you need to use concealers such as corner duct raceways or wire tape.

    Raceway

    A cable raceway is a cheap way to hide messy wires that run from the speaker around you to the floor. They can also hide the cables that run from the ceiling speaker to the floor.

    Corner ducts are very useful as they can accommodate almost any type of cable and power cord. Most raceways come in three-sided designs, so you can connect them to the corners of the floor. The kit also includes tea reducers.

    Both sides come with pre-applied adhesive backing. The cables are placed between these two areas, and then the third side is used to cover them. The third can snap on the cover, so it’s straightforward to install. To remove it, you can also paint the drains.

    Comments (0)

    Leave a Reply